Replacing oil in your T-case
This is basicly the same as changing oil in your dif, so first undo the fillerplug Vulplug

Aftapplug

Then the drainplug
(Don't forget the bucket to catch the oil!)

Drain it, put the drainplug back in place, fill it untill it overflow's and put back the fillerplug.Wipe off the oil and a job well done!!

If you might encounter a challenge here when trying to remove the fillerplug you can also fill the t-case from above. Just remove the gearlever and fill through that hole!
Caution! make sure you put back the drainplug before filling (if not, very messy) and make sure you know just how much you have to fill in. Too much oil is just as bad as too little!!!!!!

Back